Jagwire's Universal Sport Shift XL Cable Kit is the perfect way to enhance your shifting performance and precision while adding some style to your bike, too. The cables and housings in this kit are extra long and there are anti-kink end caps, so it's a great kit for longer-than-usual cable-routing setups and folding bikes. The cables are made of stainless steel for excellent durability and corrosion resistance. They fit Shimano and SRAM shifting systems. And with all the needed parts included, this kit is easy to install and ready to deliver years of flawless gear changing.
Origin-8's Seat Binder Cable hanger provides optimal cantilever brake cable routing. It mounts to most seat binder bolts and allows you to run a rear cantilever brake on your cross or touring bike even without a stock cable stop. • Mounts to most seat binder bolts • Aluminum construction • Great for cantilever brake
Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the cables to make adjustments. Best of all, the Non-Crimps are made of soft, safe rubber and they come in colors so you can add some more style to your ride.
$4.99 - $10.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$3.99 - $5.49
Jagwire's Shift Inner Wire is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass through braze ons and sold in a bag of 10.
SRAM's SlickWire Shift Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get 2 excellent stainless-steel cables, slippery lined 4mm-diameter housings and aluminum ferrules and frame protectors.
Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free
$149.90 - $202.93
- All Yokozuna cables have High-grade raw materials, flexibility, strength, tight construction and excellent quality control - Premium Stainless steel for greater durability - Standard cables are High strength die-drawn steel cable with proprietary SN56 plating that exhibits corrosion resistance superior to a zinc galvanized cable - Made in Japan
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.
$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.
Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters.
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.
Jagwire's Hooded Shift End Caps fit over the ends of your shift cable housing sections to protect them and keep the cables and shifting operating smoothly. These quality aluminum cable housing ferrules are "hooded" (the little tip on the end) to help prevent dirt and moisture from getting inside the cable housing. You get a bottle of 30.
$10.99 - $12.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. • Forged aluminum construction • Mounts to most frame mounting holes • Great for tricky cantilever brake setups • Lightweight design
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.
- Housing features the Jet Lube Process, which injects the proper amount of grease from end to end and results in 10 percent less cable drag - Lead and Dioxin free. Made in Japan
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
Page 1 of 7 Next page